A made-to-measure roller garage door starts with a clear picture of the opening. Two garages can have the same width and height but need different fitting arrangements because of the space above the opening, the shape of the walls or the position of an existing door. If you’re planning a new insulated aluminium roller garage door on the Costa Blanca or Costa Cálida, these measurements and photos will help us understand what you need.
Measure the clear opening in several places
Record the width between the sides of the opening at the top, middle and bottom. Then measure the height from the finished floor to the underside of the opening on the left, in the centre and on the right. Write down each reading separately and label where you took it. If the garage floor is being tiled or resurfaced, tell us whether your measurements are from the current floor or the intended finished level.
Send the actual readings in millimetres where possible. We’ll use those to discuss the fitting position and confirm the overall door dimensions before manufacture. For the initial quote, there’s no need to add an allowance yourself.
Check space above and beside the opening
A roller door has vertical guides at the sides and a box above the curtain. Measure how much wall space is available to the left and right, and how much room there is between the top of the opening and the ceiling or any obstruction. Take these measurements from the side where you expect the door to sit.
Look for things that might affect the position, such as a light fitting, pipe, beam or existing door track. A wide photo taken from inside the garage often shows these details more clearly than a close-up. If there’s limited room inside, a photo of the outside helps us assess what other fitting positions may be possible.
Think about the space you need to drive through
If you regularly park a van, SUV or a car with a roof box, tell us how much clear height and width you need once the door is installed. The fitting position can affect the usable opening. It’s also worth mentioning a sloped driveway, an uneven threshold or a step at the entrance, since these details can affect how the bottom of the door meets the floor.
If you’re replacing an old garage door, include a photo that shows how it’s mounted. Tell us if you want the existing door removed as part of the job so we can allow for it when preparing your quote.
Send a few photos for a free quote
Send one photo of the full opening from outside, one from inside showing the top and both sides, and a close-up of anything that looks likely to get in the way. Include the measurements, your town and any colour preference. If you have only approximate measurements at this stage, we can still use them to start the conversation.
The Gate & Garage Door Company Spain manufactures made-to-measure insulated aluminium roller garage doors. For a free, no-obligation quote, visit TGGDC.es or send your photos and measurements by WhatsApp on +34 608 208 170.
