An outdoor kitchen often needs to work two ways. When friends come round, you want the counter and serving area open. When you’ve finished for the evening or left the property for a few weeks, you may want to screen the space from view. A made-to-measure aluminium roller shutter can close a serving opening or a wider section of the kitchen, provided there’s room for the guides and the box above. Here’s what to consider before asking for a quote.
Decide which part you want to close
Start by looking at how you move through the space. If the aim is to cover a serving counter, a shutter that closes down to the worktop may be enough. If the kitchen has a full-width front opening, you might prefer a shutter that reaches the floor. Think about whether you’ll still need to get to a sink, cupboard or side door while the shutter is down.
For a counter-height opening, make sure your photos show taps, raised edges and anything else that projects above the worktop. For a floor-height opening, show any step, drain or change in level across the threshold. These details help us understand where the shutter would close and what needs to stay clear.
Look at the space around the opening
A roller shutter travels in guides fixed at either side, then rolls into a box above. In an outdoor kitchen, that space often competes with lights, shelves or a beam. Take a wide photo facing the opening and another from inside, looking out. Include the top and the full height of both sides.
Measure the approximate width and height of the opening and note the space available above it and on either side. If the kitchen is still being built, share any drawings you have and tell us when the worktop and finished floor are due to go in. Planning the shutter early gives you more scope to coordinate it with the other trades.
Tell us how exposed the kitchen is
Mention whether the opening faces prevailing winds or gets rain driven under the roof. A shutter can provide privacy and shelter, but the rest of the structure, including the roof, sides and threshold, still affects how much weather reaches the kitchen.
If the opening is near a barbecue, cooking appliance or extractor, show that in the photos too. Bring up ventilation and appliance clearances with your kitchen installer before deciding where any shutter should sit. Also think about where you’d like to operate it from when you’re carrying plates or bringing food out.
Send photos and measurements for a free quote
Include your town, the approximate opening size and a brief note about what you’d like to close off. If you have a colour in mind, tell us whether you’re matching existing doors, window frames or pergola posts.
The Gate & Garage Door Company Spain makes aluminium roller shutters to measure and serves the Costa Blanca and Costa Cálida. For a free, no-obligation quote, visit TGGDC.es or send your photos by WhatsApp on +34 608 208 170.
